Easy Project Materials Website, Free Research Project Topics And Materials

ABSTRACT

It has become very necessary to computerize the bill of material processing system in Nigeria due to the impact it has on the overall efficiency of the organization.

This project undertakes the computer-based bill of material processing system of Nigeria.

An in-depth study of the existing manual system is done and the problems encountered are noted. The need for a system is justified.

The new system is designed to solve the problems encountered in the old system.

Information management is made easier and efficiency is enhanced the benefits of the new system justify the cost and therefore these benefits cannot be over-emphasized.

TABLE OF CONTENTS

Title i

Certification ii

Dedication iii

Acknowledgement iv

Abstract v

Organization work vi

Table of contents viii

CHAPTER ONE

Introduction 1

Statement of problem 3
Purpose of study 4
Aims and objectives 5
Scope 5
Limitations 6
Assumptions 7
Definition of terms 7

CHAPTER TWO:

Literature review 12

CHAPTER THREE:

Description and analysis of the existing system. 21

fact finding methods uses 22
objectives of the existing system 23
input, process, output analysis 25
information flow diagram 30
problems of the existing system 31
justification for the new system 32

CHAPTER FOUR

Design of the new system 35

out specifications and design 35
input specifications and design 40
file design 52
procedure chart 45
system requirements 45

CHAPTER FIVE

Implementation 48

program design 48
program flowcharts 50

CHAPTER SIX

Documentation 56

CHAPTER SEVEN

Recommendation and conclusion 60

7.1 Recommendation 60

7.2 Conclusion 61

References 63

CHAPTER ONE

INTRODUCTION

Bill of material processing can be described the compilation of the raw materials required to produce any desired product. This means billing the materials before processing so as to achieve a cost-effective production, avoiding less in buying the materials for production and also in the sale of products after production.

There are a lot of problems encountered in the manual bill of martial processing system. It is difficult to maintain the relationship between raw materials at the lowest level and the in which this raw materials are combined to form final products are not shown in the manual bill of material processing.

Most raw materials are used for more than one product. It becomes difficult to determine the final products in which a particular raw materials is used unless a separate record of the usage of raw materials is maintained.

In Nigeria, some companies are a manufacturing company that produces spare parts (ie motorcycle or motor spare parts).

Those companies are the producers of engine blocks, piston and Rings, brake shoes, Inner kick, Inner gear, con rod, clutch Fiber, Tyre and Tube etc. the bill of material processing system is operated manually.

Those involved are the production manager who is in charge of production. He lists all the raw materials that are needed for production. The stores manager takes Inventory of available raw materials and notes those that are not available. He then notifies the purchasing manager.

The purchasing manager who is the head of the purchasing department is also involved. He is responsible for buying and bringing down the materials from the source.

The Head of Finance and Accounts who is responsible for releasing funds for the purchase of raw materials.

Those people co0operate with the marketing department. This is because price of the raw materials may affect the price at which products are marketed.

This study involves an analysis of the manual system and the design of a new computer based system.

Continue reading DESIGN AND IMPLEMENTATION OF A COMPUTER BASED BILL OF MATERIAL PROCESSING SYSTEM. →

computer science project topics and materials with abstract

DESIGN AND IMPLEMENT A COMPUTER BASED ACCOUNTING SYSTEM

DESIGN AND IMPLEMENT A COMPUTER BASED ACCOUNTING SYSTEM.

COMPLETE PROJECT MATERIAL COST 3000 NAIRA

ORDER NOW

MAKE YOUR PAYMENT INTO ANY OF THE FOLLOWING BANKS:

GTBANK
Account Name : Chi E-Concept Int’l
ACCOUNT NUMBER: 0115939447

First Bank:
Account Name: Chi E-Concept Int’l
Account Name: 3059320631

We also accept : ATM transfer , online money transfer

OR
PAY ONLINE USING YOUR ATM CARD. IT IS SECURED AND RELIABLE.

form>

Call Help Desk Line : 08074466939,08063386834.

After Payment Send Your Payment Details To

WE HAVE SECURITY IN OUR BUSINESS.

MONEY BACK GUARANTEE

You may also need: web design company in Nigeria

ABSTRACT

The application of computer in various disciplines has removed a lot of the problems encountered in the use of manual system in the various fields.
In recent years, First Bank, has been using the manual system recording customers credit account records which has brought about some set backs in achieving the goals of the new system.
In this project, I have analyzed the manual system and have identified some of its problems and limitations. These problems seem to hinder the realization of the goals of the existing system.
With respect to this, I have designed a Computerized Accounting System to help in minimizing some of the problems inherent in the manual system.
The new system reduces errors, operational difficulties and so on, thereby increasing public services and competitive effectiveness and profitability.
ORGANIZATION OF WORK

This work is organized into seven chapters

CHAPTER ONE:         This highlights the aims and objectives of the study, its nature, its limitation and delimitation and the importance derived from doing the work.
CHAPTER TWO:        This deals with the available literature as it is related to the project in question.
CHAPTER THREE:    Describes and analyses the existing system, state the mode of operation and identifies the problems facing it and a solution to the inherent problems.
CHAPTER FOUR:       Design of the new system, taken into consideration the old system and also the new items or structure that is needed to enhance the new system.
CHAPTER FIVE:        Describes the programming phase and its objectives, what the new system must input so that it can undertake the implementation of the designated tasks.
CHAPTER SIX:           Describes the overall achievement of the payment and accounting system and other things that has to be implemented in enhancing the growth of the Bank.
CHAPTER SEVEN:    This deals with the recommendations for the running of newly implemented system and conclusion of the work.

CHAPTER ONE

1.0 INTRODUCTION
In the twentieth century, the banking world has seen a continuing progress toward fully computerized operations. At the start of the century there were few mechanical aids with all ledgers, passbook and account statements being written by hand. By the 1970s the banks and graduated to mechanical accounting combined with an increased in business, this trend toward mechanization was a continuous process, the staffing and expansion difficulties were tackled more forcibly in the 1950s with assistance from electronic data processing techniques. It was in this period that banks ordered their first computers.

The early installations were of a batch processing nature for data that had to be sent for processing at the computer center and reports produced. Throughout the 1960s more of the clerical work was computerized and eventually by the end of 1960s all accounts were computerized.

In the middle of 1960s the utilization of branch terminal equipment linked directly to computer center was becoming a feasible proposition. This culminated in the early 1970s with the introduction of a sophisticated computer-based accounting system in current Account Department.

This project aim is to produce an indigenous software package, which will be used to improve the efficiency of the current Account System for Standard Trust Bank, Enugu. Although banks have developed packages however because of the following reasons they have failed to meet the need of the Banking Industry efficiently. Firstly, guidelines and polices for Standard Trust Bank are controlled by Central Banks, of which the revises annually there by resulting in unsteady policies as a result, there is no standard whatsoever set for the Banking Industry thus policies are flexible.

Standard Trust Bank, just as most other banks uses packages without modification hence the result is not what they desire. The modification of these packages to suit the case study as expected will cost expenditure to be wasted.

Efficiency in the banks has always been the foundation underlining the effectiveness of banks operation. Quick and accurate settlement of customer’s withdrawals, fast depositing system and procedures and the over acknowledge information process with which customers usually regard are also problems which computer-based accounting processes wishes to address by the introduction of software packages.

This package will enable Standard Trust Bank to obtain the efficiency in their account transaction hence draw more customers and more money. It is menu driver and features top-down and structured programming techniques.
The computer – based accounting system mode of operation provides an instantaneous transaction and processing of data, which gives immediate availability of result for decision-making. It will improved the efficiency of banks by:

Customer’s henceforth spending much less time in collecting their money.
There are scarcely any errors because computer handles almost all operations. If there is any mistake, the computer can always easily pick it.
Banks fraud diminishes drastically.
There is customer’s satisfaction and Bank recorded substantial increase in their profits.

1.1     STATEMENT OF PROBLEM
          There are many methods that are being used in the current Accounting System. Unfortunately, these methods are not always real in practice, to the day society. Even when they are real, they are not as efficient as expected. Some of the problem encountered by the STB are:
1.       Lack of computer for storage, there is tendency of the STB to loose customer’s file which will bring distrust to them;
2.       Due to lack of computer for accessing the file, there is tendency for them to be slow in retrieval of customer’s file, and updating of files.
3.       Customers spend much more time due to the delay of the bank.
4.       Once there is no computer for calculation, there is tendency for inaccurate calculation. However, by the end provide a suitable solution to these pressing problems of current computer-based Accounting System.

Continue reading DESIGN AND IMPLEMENT A COMPUTER BASED ACCOUNTING SYSTEM →

computer science project topics and materials with abstract

DESIGN AND IMPLEMENTATION OF A COMPUTERIZED COMMODITY EXCHANGE INFORMATION SYSTEM.

DESIGN AND IMPLEMENTATION OF A COMPUTERIZED COMMODITY EXCHANGE INFORMATION SYSTEM.
(CASE STUDY OF ENUGU STATE)

COMPLETE PROJECT MATERIAL COST 3000 NAIRA

ORDER NOW

MAKE YOUR PAYMENT INTO ANY OF THE FOLLOWING BANKS:

GTBANK
Account Name : Chi E-Concept Int’l
ACCOUNT NUMBER: 0115939447

First Bank:
Account Name: Chi E-Concept Int’l
Account Name: 3059320631

We also accept : ATM transfer , online money transfer

OR
PAY ONLINE USING YOUR ATM CARD. IT IS SECURED AND RELIABLE.

form>

Call Help Desk Line : 08074466939,08063386834.

After Payment Send Your Payment Details To

WE HAVE SECURITY IN OUR BUSINESS.

MONEY BACK GUARANTEE

You may also need: web design company in Nigeria

ABSTRACT

The need to develop a Computerized Commodity exchange information system that will provide information and keep record of transaction made on commodities has become pressing due to the rapid growth of industries that make use of these commodities and the inefficiency of manual keeping of all transaction made.
The information was got from the ministry of Agriculture, Ministry of Mines and power and Raw Materials Research Centre to develop a software package that would achieve the aim of this project.
This software package is the project I developed to be useful to both large and small exchange market, ministries, industries, and other private establishments that use locally produced commodities especially those produced in Enugu State.

ORGANISATION OF THE WORK

This section explains how the project is arranged. The chapters and their purpose are carefully stated and easily understand how this project is designed.
CHAPTER 1 of this work is about the introduction and how the project come about. It tells the problems and objectives of this project.
CHAPTER 2 tries to relate the project topic and some other topics.
CHAPTER 3 has to do with the investigation of the present system and its operations. The evaluation of the existing systems.
CHAPTER 4 explain the design of the new system and shows chart of the different operation of the new system.
CHAPTER 5 explain the overall testing of the different modules of the program it also contain the program flowchart, pseudocode the source program.
CHAPTER 6 contain the documentation and manual that will help user understand the system orientation.
CHAPTER 7 the recommendation and conclusion the appendixes that contain the program output and other necessary information.

TABLE OF CONTENTS

Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents

CHAPTER ONE
1.0 Introduction
1.1 Statement of the problem
1.2 Purpose of study
1.3 Aims and Objectives
1.4 Scope or Delimitation
1.5 Limitation or Constants
1.6 Assumptions
1.7 Definitions of Terms
CHAPTER TWO
2.0 Literature Review

CHAPTER THREE
3.0 Description and Analysis of the Existing System
3.1 Facts Findings Methods Used
3.2 Objectives of the Existing System
3.3 Input, process, Output Analysis
3.4 Information Flow Diagram
3.5 Problems of the Existing System
3.6 Justification of the new System

CHAPTER FOUR
4.0 Design of the new System
4.1 Input Specification and Resign
4.2 Output Specification and Design
4.3 File Design
4.4 Procedure chart
4.5 System Flow chart
4.6 System Requirement

CHAPTER FIVE
5.0 Implementation
5.1 Program Design
5.2 Program Flowchart
5.3 Pseudocodes
5.4 Source Program
5.5 Test Run

CHAPTER SIX
6.0 DOCUMENTATION

CHAPTER SEVEN
7.0 Conclusion And Recommendation
References
Appendix A: Agric-Based Comm.
Appendix B: Mineral-Based Comm.
Appendix C: Sellers of Agric Comm.
Appendix D: Statement of account of transaction made by Nigeria
Cement Company Nkalagu.

CHAPTER ONE

1.0 INTRODUCTION
Commodity exchange information system Enugu State as a case study is an information system developed to provide necessary information about commodities produced in Enugu state. It includes records of transaction made on these commodities. These items range from Agro to mineral – based commodities of the state.

1.1 STATEMENT OF THE PROBLEM
The problem has been largely on how to locate commodities where they are produced and the record in

Continue reading DESIGN AND IMPLEMENTATION OF A COMPUTERIZED COMMODITY EXCHANGE INFORMATION SYSTEM. →

computer science project topics and materials with abstract

DESIGN AND IMPLEMENTATION OF CLUB SIDE MANAGEMENT INFORMATION TECHNOLOGY SYSTEM

DESIGN AND IMPLEMENTATION OF CLUB SIDE MANAGEMENT INFORMATION TECHNOLOGY SYSTEM
(CASE STUDY OF ENUGU RANGERS MANAGEMENT BOARD)

COMPLETE PROJECT MATERIAL COST 3000 NAIRA

ORDER NOW

MAKE YOUR PAYMENT INTO ANY OF THE FOLLOWING BANKS:

GTBANK
Account Name : Chi E-Concept Int’l
ACCOUNT NUMBER: 0115939447

First Bank:
Account Name: Chi E-Concept Int’l
Account Name: 3059320631

We also accept : ATM transfer , online money transfer

OR
PAY ONLINE USING YOUR ATM CARD. IT IS SECURED AND RELIABLE.

form>

Call Help Desk Line : 08074466939,08063386834.

After Payment Send Your Payment Details To

WE HAVE SECURITY IN OUR BUSINESS.

MONEY BACK GUARANTEE

You may also need: web design company in Nigeria

ABSTRACT

Nigeria is a seller loving country as football is being played all levels in a curbside there are venous farms representing various clubs in Nigeria. Club scale is a team sports played by eleven (ii) players (male or females) a earth such side of the opposites team. One of each team must be the goal keeper. Usually the gave may not, if are side or both presents less than ii players. The players. Seek to advance a round reflected leather or (rubber ball) forwards and between an opponents goal post and under crossbar ,, by either ticking scribbling or pushing it with any part of the body except curbside as gave which are played on national and international levels and have their governing bodies. They are usually played according to the rules loud down by the governing bodies they include sclera, Basket ball, hard ball volley ball etc. base on these sports and gone above, we Base on now discuss the following sport chibside as followers.
TABLE OF CONTENT

Title Page i
Certification ii
Dedication iii
Acknowledgement iv
Abstract v
Table of Contents vi

CHAPTER ONE
INTRODUCTION
1.1 Over view
1.2 The aim of study
1.3 Statement of problem
1.2.1 Purpose of Study
1.3 justification of work
1.4 Limitation of Study
1.5 Methodology
CHAPTER TWO
Literature Review

CHAPTER THREE
3.1 Description and Analysis of the Existing System
3.2 Method of Data Collection used.
3.2.1 Interview method.
3.2.2 Reference to written text
3.3 Input Analysis
3.4 Process Analysis
3.5 Output Analysis
3.6 Problem of the Existing System
3.7 Justification for the new System

CHAPTER FOUR
4.0 Design of the New system
4.1 Output Specification and Design
4.2 Input Specification and Design
4.3 File Design
4.4 Procedure Chart
4.5 System Flowchart
4.6 System Requirement

CHAPTER FIVE
Implementation of the new System
5.1 Program Design
5.2 Program Flowchart
5.3 Pseudo code
5.4 Source Using

CHAPTER SIX
Documentation

CHAPTER SEVEN
Recommendation Conclusion and
References

CHAPTER ONE

INTRODUCTION
1.1 OVER VIEW
Club scale is originated from Sunland in 1848. the advocate of foot ball met in Cambridge to drown up list of rules which because know as the Cambridge rules thus meeting was not sufficient that some school of through favour carrying the ball as permitted by Ref by. This result was favoured. In 1863 this group formed a football association called London football association. This body Exited until the formation of the federation of international football (FIFH) in 1904.

1.2 AIMS AND OBJECTIVE OF STUDY
The aims and objectives of the study are as follow
i. Develop of gave software for the club
ii. To unite the youths of the country after.

Continue reading DESIGN AND IMPLEMENTATION OF CLUB SIDE MANAGEMENT INFORMATION TECHNOLOGY SYSTEM →

computer science project topics and materials with abstract

DESIGN AND IMPLEMENTATION OF COMPUTERIZED SECURITY INFORMATION SYSTEM

DESIGN AND IMPLEMENTATION OF COMPUTERIZED SECURITY INFORMATION SYSTEM (A CASE STUD OF ENUGU POLICY COMMAND)

COMPLETE PROJECT MATERIAL COST 3000 NAIRA

ORDER NOW

MAKE YOUR PAYMENT INTO ANY OF THE FOLLOWING BANKS:

GTBANK
Account Name : Chi E-Concept Int’l
ACCOUNT NUMBER: 0115939447

First Bank:
Account Name: Chi E-Concept Int’l
Account Name: 3059320631

We also accept : ATM transfer , online money transfer

OR
PAY ONLINE USING YOUR ATM CARD. IT IS SECURED AND RELIABLE.

form>

Call Help Desk Line : 08074466939,08063386834.

After Payment Send Your Payment Details To

WE HAVE SECURITY IN OUR BUSINESS.

MONEY BACK GUARANTEE

You may also need: web design company in Nigeria

ABSTRACT
The world over, it is indisputable that the introduction of computer technology in different facts of life has virtually transformed and entranced information processing, while is very vital in any organization or parastatals of government only a means of information processing, has the technology also proved to be the fastest means of information retrieval, which forms the nucleus of the study. This work tries tox-way the rate role of the computerized security information system as it affects the Nigerian police force, it looks at ways of improving the information management of the force. This research work will cover the following area record information system retirement creating for officers and crime mapping through a data bank of crime related information. A detailed design of a computerized approach that will bring the much needed innovation is given. Also included in this work is paper documentation for the neo system design.

ORGANIZATION OF WORK
This project work is organized in seven chapters. Chapter one begins with an introduction of the project, a brief statement of the problem, the purpose of the study. It explicitly outline the aims and objectives. Also eh scope limitation and constraints are also discussed. It ends finally with definition of terms. Chapter two is specifically dedicated to literature reviews pertaining of project work. Chapter three of the project is documented. The objectives of the existing system are highlighted, and the input, process and output analysis discussed the information flow diagram is shown, and the problems of the existing system and the justification for the system discussed. Chapter four discussed mainly the new system design, the output specification and design and design and file design are respectively highlighted, also the procedure chart and system flowchart is illustrated. It closes with the system requirement.
Chapter five discusses the implementation of the new system. The program design, which consists of the program flow charts and the corresponding pseudo codes, are al highlighted. The source program for the new system. Chapter six finally closes with recommendation and conclusion. Attached to this work are the police (Federal Intelligence and Information Bureau) organization structure, the input and output forms of suspect confirmation the references made to during research work are highlighted.

TABLE OF CONTENT

CHAPTER ONE
Introduction
1.1 Statement of the problem
1.2 Purpose of the study
1.3 Aims and objective
1.4 Scope of the study
1.5 Limitation of the study
1.6 Definition of terms

CHAPTER TWO
2.0 Literature review
CHAPTER THREE
3.0 Descriptive and analysis of the existing system
3.1 Fact findings methods used
3.2 Organizational structure
3.3 Objective of the existing system
3.4 Input, process, output analysis
3.5 Information flow diagram
3.6 Problems of the existing system
3.7 Justification of the new system

CHAPTER FOUR
4.0 Description of the system
4.1 Output specification design
4.2 Input specification design
4.3 File design
4.4 Procedure chat
4.5 System requirement

CHAPTER FIVE
5.0 Implementation
5.1 Program design
5.2 Pseudo code

CHAPTER SIX
6.0 Documentation

CHAPTER SEVEN
7.1 Recommendation
7.2 Conclusion

CHAPTER ONE
INTRODUCTION
Information Technology (IT) has set world order turning the world a global village, where information plays an indispensable role.
The federal security information (police) is a special outfit of the Nigeria police force, as a role similar to that of the FBI (Federal Bureau of Intelligence) of the United States (US) information they say is an indispensable force and if we should go by this meaning it buttressed the need at which classified information is to this outfit.
Over the years this outfit had made tremendous impact in combating crime, but in recent times, there has been an advance of crime wave in the country leading to insecurity of life and properties close investigation concerning crime activities reveals that the special outfit of he police force is bedeviled with absolute equipment.
Despite the glint strides taken by this outfit over the years changing their investigation and recording equipment to tape storage cassette as recorders, there are still a lot of surmountable problem which has litterto, reduced eh efficiency bureau, Ogbor-Hill, Aba and other division of the outfit through out Nigeria. The panacea to this may no doubt, le in the introduction of a property designed computer base system which will bring the much desired automation hence a prerequisite for being a member of the world order vis-a-vas information technology.

1.1 STATEMENT OF THE PROBLEM
The statutory duty of the federal security and information bureau (police) is crime prevention and intelligence network while is solely based on information. This information received from conducted investigation, which should be supplied to the bureau within minutes using electron communication. But the take days or weeks and sometimes months if the investigation is carried in a distance area. The storage medium currently at disposal for information is susceptible to unauthorized access and damage.
Most often, the recorded information is usually not within eh reach when needed. Going by this high level of graft in the country officers can easily remove recorded information of every serious crime activity by mere