DESIGN AND IMPLEMENTATION OF SOFTWARE FOR MORTGAGE BANKING

ABSTRACT

This project work which is conducted to meet the stipulation of the National Board for Technical Education (NBTE) for the award of National Diploma in computer science deals with the application of computer in Mortgage Banking operations. It addresses using a sophisticated computer software in handling the existing manual record system chapter one introduces the topic with sub-headings like: Background of the study, statement of the problem, purpose of the study, objective of the study scope of the problem and Definition terms
Chapter two deals with the related write-ups of the topic a with related argument made by pertinent individuals and group.
Chapter three describes and analyses the current system as well as the facts finding methods used.
Chapter four deals with the design of the new system it describes both the input and output specification of the system.
Chapter five deals with the implementation of the new system. It also specifies system conversion procedure.
Chapter six provides an overview documentation. It also animates the program details.
TABLE OF CONTENT

CHAPTER ONE
1.0 Introduction
1.1 Background of the study
1.2 Statement of the problem
1.3 Purpose of the study
1.4 Objectives of the study
1.5 Scope of the problem
1.6 Definition of terms

CHAPTER TWO
2.0 Literature Review

CHAPTER THREE
3,0 Overview of the existing system
3.1 Description and analysis of the existing system
3.2 Method of data collection
3.2.1 Interview method
3.2.2 Reference to written text
3.3 Input Analysis
3.4 Process Analysis
3.5 Output Analysis
3.6 Problem of the existing system
3.7 Justification for the new system

CHAPTER FOUR
4.0 Description and implementation of the new system
4.1 Output specification and description.
4.2 Input specification and description
4.3 File design
4.4 Procedure chart
4.5 System flowchart
4.6 System requirement

CHAPTER FIVE
5.0 Implementation
5.1 Program description
5.2 Program flowchart
5.3 Pseudopodia
5.4 Source listing
5.5 Test ran

CHAPTER SIX
6.0 Documentation

CHAPTER SEVEN
7.0 Recommendation and conclusion
Reference.
Appendix

CHAPTER ONE

1.0 INTRODUCTION
In our society today the use of computer especially in banking sector of the economy have been so eminent. Nearly all banking or financial institutions have computerized their banking operation. The major reason or the fact has been using computer to manage the flow of information within the institution. This is lightly necessary since the survival of any institution including the financial institution like commercial Banks, mortgage Banks Insurance computer etc. depend much on a viable information system. An information system that enables the users to track necessary records and transaction related to the institution in a possible minimum time. Apart from using computer in ensuring a viable information system (IS), error prone information by extensive mammal data mentioned and many others to perform the entire task mentioned and many others have been enhanced by the application software. Application software are programs that direct the performance of a particular use or application of computers and computer networks to meet the information processing needs of end user. This is to say without the application software a computing system I incapable of performing the user task. This is often referred to as computerization. The following section of the project report present the feasibility of computerizing the operation of mortgage banking.

1.1 BACKGROUND OF THE STUDY
Depository institutions have traditionary originated residential mortgage louns to hold in their loan portfolios and mortgage banking is a natural extension of this traditional origination process. Although it can include loan origination mortgage banking goes beyond this basic activity. A bank that only originates and holds mortgage loans in its loans in its loan portfolio has not engaged in mortgage banking as defined here.
Mortgage banking generally involves originates, purchases and sales through the secondary mortgage market. A mortgage bank can retain or sell loans it originates and retain or sell the servicing on those loans. Through mortgage banking national banks can and do participate in any or a combination of these activities Banks can also participate in mortgage banking activities by purchasing rather than originating loans.
The mortgage banking industry is highly completive and involves many firms and intense competition. Firms engaged in mortgage banking vary in size from very small local firms to exceptionally large, nationwide operations commercial banks and their subsidiaries and affiliates make up a large and growing proportion of the mortgage banking industry.
Mortgage banking activities generate fee income and provide cross-selling opportunities that enhance a bank’s retail banking franchise. The general shift from traditional lending to mortgage banking activities has take place in the context of a more recent general shift by commercial banks from interest income activates to non-interest, fee generating activities.

1.2 STATEMENT OF PROBLEM
The larger challenge facing lending institutions today is the is the lack of system and processes that track, and analysis data effectively. The loan origination process generates massive amounts of data that needs to be managed by the asset management finance and servicing functions, key management reporting and data analysis capabilities are critical in dealing with issues and quantifying trends in delinquency rates and tracking of compliance metrics-basically the bulk of mortgage banking operations. In addition, these functional areas are responsible for meeting t

DESIGN AND IMPLEMENTATION OF A COMPUTERISED STADIUM MANAGEMENT INFORMATION SYSTEM.
(CASE STUDY OF NNAMDI AZIKIWE STADIUM ENUGU).

ABSTRACT

The accessibility, availability and reliability of data supporting management information system are important to the users in stadium management, just as the use of the internet and web technology is taking root in commerce, communication and so on. The Internet and web technology in stadium management information system is expected to take root and deliver benefit to the management.
This research work highlights the role computer information management system plays in the success of the operations of the stadium, allowing the organization stand the challenges posed by the individuals.
Furthermore, this work examine the current status of stadium management in Nigeria, what it will take to make it successful and how data can be handled and maintained effectively.

TABLE OF CONTENT

CHAPTER ONE
INFORMATION
1.1 Background of the study
1.2 Statement of the problem
1.3 Purpose of the study
1.4 Objective of the study
1.5 Scope of the study
1.6 Limitation of the study
1.7 Assumption
1.8 Definition of terms

CHAPTER TWO
LITERATURE REVIEW

CHAPTER THREE
OVERVIEW OF THE EXISTING SYSTEM
3.1 General description of the existing system
3.2 Method of data collection used
3.3 Objectives of the existing system
3.4 Organisational structure
3.5 Input analysis
3.6 Process analysis
3.7 Output analysis
3.8 Information flow diagram
3.9 Problem of the existing system
3.10 Justification for the new system

CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
4.1 Output specifications and design
4.2 Input specifications and design
4.3 File design
4.4 Procedure chart
4.5 System flow chart
4.6 System requirement

CHAPTER FIVE
IMPLEMENTATION
5.1 Program design
5.2 Program flow chart
5.3 Pseudocode
5.4 Source program listing
5.5 Test run
CHAPTER SIX
DOCUMENTATION
6.1 System documentation
6.2 Program documentation
6.3 User documentation

CHAPTER SEVEN
CONCLUSION AND RECOMMENDATION
7.1 Conclusion
7.2 Recommendation

Bibliography
CHAPTER ONE

BACKGROUND OF THE STUDY
1.1 INTRODUCTION
The advent of computer Technology has brought relief to repetitive tasks and has helped in the better management and origination of data. Information management system can be applied to any system that facilitates storage, management and retrieved of data and information required for some particular application within a computer system. This makes it easier for data to be handled or managed.
The stadium staffs have been finding it so difficult to manage information for example, in the existing system where everything is processed manually, the operators find it difficult to store, locate or retrieve information when necessary. Also the issue of crowd control and ticketing, which is needed in events to generate income for the sector. Processing ticket for an event manually can be costly, time – consuming and waste ticket stock which is always encountered in some event due to the excess ticket processed manually.
The computer system can be used in so many ways in the stadium, for example, crowd control, processing of ticket for an event, managing office files and so on.
This work concentrates on the computerized ticket, crowd control, information management in the stadium and facility management. With the aid of computer system, the data will be properly managed, organized and construction of a suitable program that will help in the management of stadium.

1.2 STATEMENT OF THE PROBLEM
Following the problem encountered in the organization, tickets that are processed for an event and the end, there will be left over (waste ticket stock) which create loss in the finance of the stadium unable to communicate with one another in other to share information which leads to time-consuming, re-entering of information and lack of centralized system for customer information.

1.3 OBJECTIVES OF THE STUDY
This work is aim to reduce the work of

DESIGN AND IMPLEMENTATION OF A COMPUTERISED MARKET SURVEY REPORTING SYSTEM

ABSTRACT
This project is based on the possible exploration of computer Technology in Today society in market surveying in the daily discharge of duties.
This project involves the design and development of computerized market survey report analysist.
The design will enable the user to achieve a desirable report at an increased efficiency, accuracy and speed of doing work and at the same time reduce man – hour repured for piece of work.
This calls for an alternative method which ie accurate, quick and inexpensive. This project achieved merit by eliminating all these flows that result from manual operation and present a very accurate, decisive and systematic measure of survey report.

TABLE OF CONTENT

CHAPTER ONE
1.0 Introduction
1.1 Background
1.2 Aim or objective of the study
1.3 Statement of the problem or purpose
1.4 Justification of the purpose topic
1.5 Scope of the project
Methodology
Block diagram
Thesis Organization

CHAPTER TWO
LITERATURE REVIEW

CHAPTER FIVE
3.0 overview of the existing system
3.1 Description and analysis of the existing system
3.2 Method of data collection
3.2.1 Interview method
3.2.2 Reference to written text
3.3 Input analysis
3.4 Process analysis
3.5 Output analysis
3.6 Input analysis
3.7 Problem of the existing system
3.8 Justification for the new system

CHAPTER FOUR
4.0 Design for the new system
4.1 Output specification and design
4.2 Input specification and design
4.3 File design
4.4 Procedure chart
4.5 System flowchart
4.6 System requirement

CHAPTER FIVE
Implementation
Program design
Program flowchart
Pseudo code
Source listing
Test-run
CHAPTER SIX
DOCUMENTATION

CHAPTER SEVEN
Recommendation & conclusion
Reference
Appendix (if any)
CHAPTER ONE

1.0 INTRODUCTION
In order not to embrace hitch in the carrying out of any project, it is necessary to define the objective of the project. The process surveying enable us to map out the limitation and the delimitation of the project.
In surveying, we set out the necessary steps and areas that considered to be useful and necessary to implement the objective.
In this case, we identify the problem, it’s sources, causes and to identify solutions to the problem.
In the case study of doing these, the objective must be certain.

1.1 BACKGROUND OF THE STUDY
The Background of this study involves indent study of the system report being designed to determine the input data to the report system and how system report objective can be realized.
Data collected or survey made determined the system output and input and grouped into various files (1) Equipment requirement.
EQUIPMENT REQUIREMENT: To use this report system in survey the following equipment may be needed.
i) An IBM or its compatible
ii) Magnetic Diskette (3.25 x 5.25 or 35 x 3.5 inches)
iii) An IBM line printer or its compatible
iv) A printer interface cable.
Optional equipment: Hard Disk Properly Installed.
MEMORY REQUIREMENT: The design of this system was highly structured by breaking the program in module using Top-Down design technique and loding the program in GW BASIC. Each program after use call another program from the diskette and pass over the content of relevant variable over to the incoming program by using “COMMON” statement it minimizes effectively the size of primary memory required by the system.
TEST DATA
The whole system was tested by obtaining survey analysis of previous building project. Fed the cost of sub-element into the system and compare the output.

DOCUMENTATION
This system is documented in a way that any one who is not a computer scientist or market surveyor can use it effectively. The following types of a documentation are implemented.
i) Design documentation
ii) Operational documentation

DESIGN AND IMPLEMENTATION OF STATE CIVIL SERVICE PAYROL ACCOUNTING SYSTEM
(A CASE STUDY CIVIL SERVICE COMMISSION ENUGU)

ABSTRACT
Ever since man discovered the computer and hence computer science, attempt has been made to computerize every facet of human life.
This project work express the issue of designing and implementing a state civil payroll acknowledges (speed and accuracy) over the more tedious inefficient and true consuming manual system.
This system encounters the following problems. Late receipt of raw data each month, regular break down of the accounting machine presently used for data processing, irregular power supply, in any errors resulting from the manual methods of data processing and the office caused by bulky files and constant complaints for errors from the workers. Consequently a computerized payroll accounting system when designed to take care of the above problems.

CHAPTER ONE
1.0 Introduction
1.1 Background of the study
1.2 Problems defunction and analysis
1.3 Objectives of study
1.4 Scope of study
1.5 Limitations
1.6 Assumptions
1.7 Definition of terms

CHAPTER TWO
2.1 Literature Review

CHAPTER THREE
3.1 Descriptions and analysis of the existing system
3.2 Methods of fact finding
3.3 The organizational structure
3.4 Objective of the existing system
3.5 Input, process and output analysis
3.6 Information flow diagram
3.7 Problem of the existing system
3.8 Justification for the new system

CHAPTER FOUR
4.1 Software designed and implementation
4.2 Output specification and design
4.3 Input specification and design
4.4 File Design
4.5 Procedure char
4.6 System requirement

CHAPTER FIVE
5.1 Implementation
5.2 Program design
5.3 Program flow chart
5.4 Pseudocodes

CHAPTER SIX
6.1 Documentation
6.2 Identification
6.3 User information

CHAPTER SEVEN
7.1 Recommendation
7.2 Conclusion
Reference

CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Computer, the versatile data processing machine, has been found very useful in every human endeavour since its incursion into many fields of study, industry, business, sciences and technology in general. Payroll is being prepared by organization, committees, governments and other business firms, it is also part of account department, in my organizational concern. It is used for the preparation of worker’s salary daily, weekly or monthly.

The payroll module, which helps in data processing, processes monthly pays of all the employees in state civil services commission. The module maintains staff loans, advances, tax and other deductions from staff pay. It also performs annual increment on the salary of qualified staff each month. The payroll lists every employee for whom the computer has produced a payroll cheque and shows for each employee what deduction are subtracted from gross earnings to arrive at net pay. This report is reviewed by the manager of the payroll department before the cheques are released for distribution.
1.2 PROBLEM DEFINITION
Over the years, manual method of payroll has been used. This method has its problems. It has been proven to be very ineffective and inefficient. Some of the problems are
 The job of preparing salary payment in annually is tedious causes delay.
 As a result of the problem above, manual methods have a lot of discrepancies and raise doubts in the voucher.
 This method encourage fraud figures are easily manipulated and changed.
 The manual method requires people who are competent in mathematics related computation to do a reliable job

DESIGN AND IMPLEMENTATION COMPUTERIZED EMPLOYEE CLOCKING SYSTEM
( A CASE STUDY OF MARLUN CONSTRUCTION
COMPANY ENUGU)

ABSTRACT
This project was borne out of the necessity to address the inherent possible encountered by the employee and staff of MALUM organization. And how to implement a new design to the old existing system. Based on the modern improvement of employee clocking system.
This computerization employee clocking system will make employee boast their productivity and increase the organization record and increase the organization record and the time of employees activities.
ORGANIZATION OF WORK
The study is divided into seven chapters. Chapter one deals with the introduction of the study, the statement of the problem, purpose of the study, aim & objectives of this project, the scope, limitations, assumptions and definition of relevant terms.
The review of related literature was discussed in chapter two.
Chapter three deals with the description and analysis of the existing system, fact finding method used, organizational structure, objective of the existing system, input, process and output analysis, information flow diagrams, the problems of the existing system and justification for the new system.
The system design and the output specification, input specification and design, procedure client, system flow file design, procedure chart, system flow chart and system requirement formed the core of chapter four.
Chapter five deals with the implementation of the design system, purpose design, program chart and test run.
The program modules, user guide and documentation exercise was fully expressed in chapter six.
Chapter seven deals with recommendation and conclusion, bibliography.
TABLE OF CONTENTS

CHAPTER ONE
1.0 Introduction
1.1 Background of the study
1.2 Statement of problem
1.3 Purpose of study
1.4 Scope of study
1.5 Limitations
1.6 Assumption
1.7 Definition of terms
CHAPTER TWO
2.0 Literature review
CHAPTER THREE
3.0 Description and analysis of the existing system
3.1 General description of the existing system
3.2 Method of fact finding used
3.3 Organizational structure
3.4 Objectives of the existing system
3.5 Input, process and output analysis
3.6 Information slow diagram
3.7 Problem of the existing system
3.8 Justification for the new system
CHAPTER FOUR
4.0 Design of the new system
4.1 Output specification and design
4.2 Input specification and design
4.3 File system
4.4 Procedure chart
4.5 System flowchart
4.6 System requirements
CHAPTER FIVE
5.0 Implementation
5.1 Program design
5.2 Pseudoes
5.3 Sources programs
5.4 Test run
CHAPTER SIX
6.0 Documentation
6.1 System documentation
6.2 Program documentation
6.3 User documentation
CHAPTER SEVEN
7.0 Conclusion and recommendation
7.1 Conclusion
7.2 Recommendation
Bibliography
CHAPTER ONE
INTRODUCTION
1.0 BACKGROUND OF STUDY
Employee clocking systems are time system used by organization to accurately record the number of hours worked by each employee every week
The clock have evolved with time and the companies still need some sort of system that they can use employees payroll and ensure that the employees are paid for each hour they worked.
Today, employee use swipe cards with a negative stripe through a slot that reads their name and records the time every time they clock in or out, much like the old punch clock system of long ago.
At the end of a work week, the main computer computes the total hours worked for every employee and prints it out on a spread sheet. This rids the payroll system of human error, making it much more efficient.
The MALUM organization does not used computerized employee time system. The organization make use of manual time clock system, though time saving and error-free, is not entirely perfect.
Sometimes, the magnetic strip on the back of a card may get damaged. When the employee swipes the card, the machine may not register it.
Such inadequacy are corrected in the computer time clock system. Even with the advert computer software and advanced time keeping techniques, the principle of the employee time clock remains the same.
This project expresses the hourly employees will always need a way to keep track of their time and organizations will need logical ways to monitor and records an employee’s time to ensure productivity.

1.2 STATEMENT OF PROBLEM
The problem is centered on how to design and implement a computerized employee clocking system for MALU organization.
From the study layout the problem determine are:
1. Inadequacies of the manual time clock system
2. The problem encountered by the staff reservation section.
3. The impact of this software reservation section
4. The impact of this software design is not entirely perfect.
5. The company policy forbids employees from punching or swiping for